Sinamics V20 Modbus Register
With its compact SINAMICS V20, Siemens offers a simple and cost-effective drive solution for these types of applications. SINAMICS V20 sets itself apart with its quick commissioning times, ease of operation, robustness and cost efficiency. With seven frame sizes, it covers a power range extending from 0.12 kW up to 30 kW (1/6 hp up to 40 hp). Data sheet for SINAMICS V20 MLFB-Ordering data Figure similar Mechanical data 107.8 mm ( 4.24 in ) Degree of protection IP20 / UL open type 68.0 mm ( 2.68 in ) Height Net weight 0.60 kg ( 1.32 lb ) Depth Size Width 142.0 mm ( 5.59 in ) FSAA Unshielded 50 m (164 ft) Max. Motor cable length Connections Shielded 25 m (82 ft). SINAMICS V20 – advantages 4 SINAMICS V20 feature Your benefits Easy, and all from a single source SIMATIC Panel SIMATIC PLC SINAMICS V20 Ethernet / PROFINET USS MODBUS RTU Together with SIMATIC PLC/HMI, tested and ready-to-run application examples to connect a V20 converter to a controller. Different application examples can be. The Modbus register will be read from the slave once, and the 16-bit data will be shared with successive maps or rules, with each map or rule selecting its bit of interest. The bit mask shown in the expanded form of the Babel Buster RTU read map is a 4 digit hexadecimal (16 bit) value used to mask out one or more bits in a register.
Sinamics V20 Modbus Register Key
Hello everyone,
I'm trying to use an arduino Duamelinove to comunicate with a Sinamics V20 inverter via RS485. I have a shield to convert the RS232 from the arduino to the RS485 from the inverter. I also have a RS485/USB adapter to monitor the communication from a computer.
I've loaded the SimpleModbusMaster library example on the arduino, and I'm getting transmission errors on the computer monitor (values different from what was transmited). The inverter receives the signal, but it returns a 'parity error'.
I also tried communicating the inverter with the computer, without the arduino, using a Modbus Master demo and, this time, it returns a 'character structure error'.
Sinamics V20 Modbus Registers
Has anyone ever tryied to do something similiar before? I'm not sure if this is even possible as everything I find online mention only communication between Siemens Inverters with Siemens PLCs. Colos create activation code.
Sinamics V20 Manual
Any thoughts would be appreciated.